| Index
» Projects
» phpMyEdit
» Forum
» My equipment is malfunctioning |
 |
tsesh
Joined: 01 Aug 2023
Posts: 3
Posted: 2023-08-07 14:03
Back to top
Reply with quote
|
I have a set of 6 S19j Pro mining machines that I've been using for the past 6 months. Throughout this period, they've been operating smoothly within a noise isolation box, and the temperatures have always been maintained below 71 degrees Celsius. However, recently, I encountered an unexpected issue with one of the mining boards. It started disconnecting intermittently, leading to a noticeable decline in mining output. Initially, I suspected it might be due to a hardware malfunction or a software glitch, but despite multiple restarts, the problem persisted.
Interestingly, these machines were obtained from various sources. While 2 of them were brand new and purchased directly from ASICMinerValue, the other 4 were second-hand devices acquired from ASICFinder. What's puzzling is that most of the issues seem to be affecting the brand new devices.
In an attempt to resolve the problem, I closely observed the mining setup and noticed a possible correlation with network fluctuations. In response, I decided to experiment with custom firmware, hoping it would enhance the devices' performance and stability. However, it's important to note that using specific firmware versions could potentially increase
|
|
Post new topic
Reply to topic
|
|
|
|
Login
Registration
Slovak
